Description
A dark oversized high neck tee built in the language of official supporter gear without borrowing official marks.
US-SA sits where the procedural label usually goes: calm, flat, and already filed.
Fabric and fit
Stanley/Stella Blaster 2.0 (SATU020), made from 100% organic combed ring-spun cotton. Fabric weight: 200 g/m² (5.9 oz/yd²).
An oversized fit with dropped shoulders, set-in sleeves and a ribbed high collar.
Size guide
Compare these garment measurements with a tee you already like. Lay it flat before measuring. Width is measured across the shirt, not around your body.
- Length: Measure from the highest shoulder point beside the collar to the bottom hem.
- Width: Measure from the seam below one sleeve straight across to the seam below the other sleeve.
- Sleeve length: Measure from the top of the set-in sleeve to its hem.
These measurements are supplied by Printful. Actual garment measurements may vary by up to 2 inches (5 cm).
| Size | Length | Width (flat) | Sleeve length |
|---|---|---|---|
| S | 73 | 63 | 24 |
| M | 75 | 67 | 24.5 |
| L | 77 | 71 | 25 |
| XL | 80 | 76 | 25.5 |
| 2XL | 82.5 | 81 | 26 |
| Size | Length | Width (flat) | Sleeve length |
|---|---|---|---|
| S | 28.74 | 24.80 | 9.45 |
| M | 29.53 | 26.38 | 9.65 |
| L | 30.31 | 27.95 | 9.84 |
| XL | 31.50 | 29.92 | 10.04 |
| 2XL | 32.48 | 31.89 | 10.24 |
Care
- Wash inside out with similar colors, using cold water, a gentle cycle and mild detergent.
- Do not bleach, use fabric softener or dry-clean.
- Hang-dry or tumble-dry on low heat.
- If needed, use a cool iron on the inside. Do not iron the artwork.
Reviews
There are no reviews yet.